Search
English
All Categories
    Menu Close

    AR100 - Standard


    ★ Guide-Deep Groove Ball Bearing, It enables the bearings to accommodate radial and axial loads in both directions to reach high precision and high speed- revolving.
    ★ Transmission parts-Worm & Worm Gear, It transmits through the gear and is usually used in Reducer.
    ★ Material-Aluminum Alloy


    This product pic. shows as AR59-A3NN-ND.

    Ship to
    *
    *
    Shipping Method
    Name
    Estimated Delivery
    Price
    No shipping options

    Update:2022.08.03

    Model No.

    AR100-A3NN-ND

    Mechanical Spec.

    Table Size (mm)

    Ø 100

    Travel Stroke (°)

    360

    Drive Type

    Worm & Worm gear (Ratio 1 / 144)

    Rail

    Crossed Roller Bearing

    Stage Material / Surface Treatment

    Aluminum Alloy / Black anodized

    Main Unit Weight (Kg)

    1.2

    Coupling

    FAMMS12-5*5

    Accuracy Level

    N:Standard grade 

    Wiring Method 

    N:GMT Standard 

    Precision Spec.

    Resolution (Pulse) (°)

    0.0125 (Full) 

    0.00625 (Half)

    Max. Speed (Full Step) ( ° / sec)

    25

    Positioning Presion (°)

    0.1

    Repeatability Precision (°)

    ± 0.05

    Load Capacity (Kgf)

    20

    Missed Step (°)

    0.1

    Parallelism (µm)

    50

    Dynamic Straightness (µm)

    30

    Dynamic Parallelism (µm)

    30

    Electrical Spec.

    Motor

    Type / Shaft Numbers

    2-phase stepper / ☐ 35 double shafts

    Brand / Model

    GMT / 2MS-N35D36A

    Driver Brand / Model

    GMT / GTR22G-D (Additional options)

    Connector

    Stage Side Connector

    15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS

    Controller Side Connector

    15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options)

    Sensor

    Origin Sensor

    Photoelectric sensor GMT-sensor

    Limit Sensor

    Power Voltage

    24V ± 10%

    Control Output

    NPN open collector output under 24V 8mA

    Output Control

    Testing (sensing):output transistor OFF (closed)

     

     

    System Configuration Diagram

    ♦   For selection of the drivers preferred, please refer to the reference table or the catalogue of MotorDriver.

    ♦  All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs. 

     

    Axis Definition

    GMT has defined different axis as the following figuration according to the movement direction:

    Horizontal movement direction is X and Y axis.

    Vertical movement direction is Z axis.

    Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis.

    Green arrows present the specified axis movement direction.

     

    Motordriver Reference Table