AZ5008-Ultra Precision

★ Guide-Crossed-roller Guide, In structure, V-groove and crossed roller acquire movement in high accuracy and capacity by linear transmission to act a high precision movement and load capacity performance.
★ Transmission Parts-Ball screw, It transmits through the ball involving in the locknut and screw to reach the accuracy and longer operation lifetime.
★ Material-Aluminum Alloy

Ship to

Shipping Method

Name

Estimated Delivery

Price

No shipping options

更新日期：2025.04.30

Model No.			AZ5008-A6OPR-JD
Mechanical Spec.	Table Size (mm)		50*50mm
	Travel Stroke (mm)		±4mm
	Drive Type		Ball ScrewΦ6，lead1mm，斜楔推升1:2
	Rail		Crossed Roller Guiding
	Stage Material/Surface Treatment		Aluminum alloy/anodized color
	Main Unit Weight (kg)		0.45kg
	Coupling Model		-
	Accuracy Level		OP：Ultra Precision
	Wiring Method		R：Right side installation
Precision Spec.	Resolution(Pulse) (µm)		1um(Full)/0.5um(Half)
	Max. Speed(Full Step) (mm/sec)		5mm/sec
	Positioning Precision (µm)		8um
	Repeatability Precision(µm)		±0.5um
	Load Capacity (Kgf)		3kgf
	Missed Step (µm)		2um
	Parallelism(µm)		20um
	Dynamic concentricity (µm)		5um
	Dynamic Parallelism (µm)		25um
Electrical Spec.	Motor	Type / Shaft Numbers	5-phase stepper motor / ☐20double shafts
		Brand / Model	Orientalmotor/PK513PB
	Driver Brand / Model		Orientalmotor / CVD Series - 5 Phase stepping motor (Additional options)
	Connector	Stage Side Connector	15-Pin male end connetor D-SUB 12-Pin male end connetor HRS
		Controller Side Connector	15-Pin male end connetor D-SUB(Additional options) 12-Pin male end connetor HRS(Additional options)
	Sensor	Origin Sensor	Photoelectric sensor GMT-sensor
		Limit Sensor
		Origin Approximation Sensor
		Power Voltage	24V±10%
		Control Output	NPN open collector output under 24V 8mA
		Output Control	Testing (sensing)：output transistor OFF (closed)

*1 If you need left-side wiring or motor replacement, please contact sales
*2 The standard connector types of the product are D-SUB and HRS
*3 The length of the lead from the connector is about 26cm

Multi-point repeated positioning accuracy

♦ Accuracy measurement description

1. Unidirectional positioning accuracy: within the range of the predetermined detection stroke, starting from a starting position, moving and positioning in a certain direction sequentially, and detecting the actual
The difference between the movement value and the target movement value, and the maximum error value is taken. This value is the unidirectional positioning accuracy.
2. Multi-point repeated positioning accuracy: within the range of the predetermined detection stroke, when the mechanical program is executed, the position accuracy obtained by repeatedly running the same program code
degree. Calculate the position deviation that occurs when the same position is repeated back and forth, and obtain the deviation value between the two.

♦ Precision introduction

1. Design the GMT high-level precision inspection method to meet the precision requirements of fiber coupling and semiconductor manufacturing process.
2. The detection of GMT high-end precision linear slide module series adopts multi-point repeated measurement, that is, multi-point quantity measurement within a fixed stroke range (points
The amount is increased or decreased according to the length of the stroke), and the actual change of the round-trip position error is recorded, in pursuit of high precision and repeatability.
3. Through the non-contact laser interferometer measurement, to ensure that the unidirectional positioning is within 10μm, and the multipoint repetitive positioning accuracy is within 1.5μm. If there is a need for higher precision and precision, please contact the regional sales/business team.

System Configuration Diagram

♦ For detailed specifications, please read the description for the stage and connecting cable.

♦ For selection of driver, please refer to the cross-reference table for the motor/driver of the standard motorized stage or the GMT motor and driver catalog.

♦ The most preferred driver is recommended to be specified by GMT as considerations. For different needs, please choose the suitable driver based on real functional needs.

Axis Definition

GMT has defined different axis as the following figuration according to the movement direction:

Horizontal movement direction is X and Y axis.

Vertical movement direction is Z axis.

Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis.

Green arrows present the specified axis movement direction.

AZ5008-Ultra Precision

Motor/driver

Payment options