Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Search
-01_3.jpeg "GMT TW")
English
- CAD Model Selection
- Support
- Events
- About GMT
- semiconductor and optical communications industries solutions
- Linear Motion Components
- Manual Stages
- Motorized Stages
- Alignment Stages
- Direct Drive Module Series
- Automation Module Series
- Optical Components
- Motor/Drive
- Shrink Fit Machine
- Stamping & Mould Components
- INVESTOR AREA
- Contact Us
- NEWS
Manual Stages
MCV-41
Z axis manual stage
Single axis-Z axis (up & down stroke、only up stroke)
Single knob、Dual knob
Travel stroke : ±50 (mm)
★ Guide- Dovetail type – pinion and rack. It is suitable for higher working frequency, requirement of faster movement and large stroke.
★ Transmission Parts- Rack and pinion. It is suitable for high speed mass feed.
★ Material- Aluminum Alloy
★This product pic. shows as MCV-49.
MCV-44
Z axis manual stage
Single axis-Z axis (up & down stroke、only up stroke)
Single knob、Dual knob
Travel stroke : ±10 (mm)
★ Guide- Dovetail type – pinion and rack. It is suitable for higher working frequency, requirement of faster movement and large stroke.
★ Transmission Parts- Rack and pinion. It is suitable for high speed mass feed.
★ Material- Aluminum Alloy
★This product pic. shows as MCV-49.
MCV-46
Z axis manual stage
Single axis-Z axis (up & down stroke、only up stroke)
Single knob、Dual knob
Travel stroke : ±15 (mm)
★ Guide- Dovetail type – pinion and rack. It is suitable for higher working frequency, requirement of faster movement and large stroke.
★ Transmission Parts- Rack and pinion. It is suitable for high speed mass feed.
★ Material- Aluminum Alloy
★This product pic. shows as MCV-49.
MCV-49
Z axis manual stage
Single axis-Z axis (up & down stroke、only up stroke)
Single knob、Dual knob
Travel stroke : ±30 (mm)
★ Guide- Dovetail type – pinion and rack. It is suitable for higher working frequency, requirement of faster movement and large stroke.
★ Transmission Parts- Rack and pinion. It is suitable for high speed mass feed.
★ Material- Aluminum Alloy
MHGS Inch Type-Micrometer-head
Micrometer - MHGS-FN type（Inch Type)
Measurement range-0-2''
★ Front tip – Flate. Shaft diameter is used by allowable tolerance h6.；Round. As transferring device, sphere type could decrease errors caused by slanting of mounting portion of micrometer to minimum.
★ Installation way – Lock screw, it is simply and firmly locked.；Set screw, locked and welded process. Attached screw type, recommended thickness 6mm
★ Scale par finish：Hard chrome-plating
★ Gauging plate：SKS3（Hardness：above HRC60）
MHGS Standard Type-Micrometer-head
Micrometer- MHGS type（standard type）is used widely and frequently.
Measurement range-0-50mm
Accuracy-0.005mm
★ Front tip – Flate. Shaft diameter is used by allowable tolerance h6.；Round. As transferring device, sphere type could decrease errors caused by slanting of mounting portion of micrometer to minimum.
★ Installation way – Lock screw, it is simply and firmly locked.；Set screw, locked and welded process. Attached screw type, recommended thickness 6mm
★ Scale par finish：Hard chrome-plating
★ Gauging plate：SKS3（Hardness：above HRC60）
Payment options
